Wurth
Wurth cleaning diesel particulate filter 400ml
Wurth cleaning diesel particulate filter 400ml
SKU:5861014500
Couldn't load pickup availability
Cleans and removes carbon and ash sediment from diesel particulate filters
- Contents: 400 ml
- Color: Pink
- Smell/Fragrance: Ammoniacal
- Chemical base: Water
- Shelf life from date of production: 15 months
- Density: 1.01 g/cm³
- Density conditions: at 20°C
- pH value: 11.47
Loosens and removes carbon deposits in the particle filter
DPF can be cleaned without having to remove it
Extremely economical, as there is no need to install a new particle filter (it depends on the condition of the particle filter)
Non-flammableNeutral formula, without ash or metals
Residue-free evaporation
This information is intended to advise the user based on our knowledge, testing, and experience. Preliminary testing is required! For more information, see the technical data sheet.
These instructions for use are recommendations based on our own testing and experience. We recommend that you perform your own testing before each application. Due to the wide range of applications and processing and storage conditions, we assume no responsibility for the results of a specific application. We assume no legal liability for any advice or technical information provided by our toll-free customer support line unless this advice and/or technical information is an integral part of the contractual agreement, or the customer support employee acted voluntarily or intentionally. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop our products.
- Remove the pressure or temperature sensor
- Insert the probe through the opening and spray towards the particle filter until the can is empty.
- Then, you need to start the regeneration manually using the test device or by performing a road test.
- Check for existing memory errors after regeneration and clear them if necessary. One can is sufficient for a particle filter.
Diesel particulate filter cleaner is used to correct performance losses or malfunctions exacerbated by dirty diesel particulate filters. Absorption capacity is fully restored by cleaning the filter.
